Fail To Build On Raspberry Pi5 With Bookworm

by ADMIN 45 views

Introduction

The Raspberry Pi 5 is a powerful single-board computer that offers a wide range of possibilities for various projects, including retro gaming. Bookworm is a popular tool for building and managing retro game collections on the Raspberry Pi. However, some users have reported issues with building Bookworm on the Raspberry Pi 5, particularly with the SDL and SDL_mixer versions. In this article, we will explore the issue and provide a step-by-step guide on how to overcome it.

Understanding the Issue

The error message indicates that the linker is unable to find the Mix_PlayChannel function, which is part of the SDL_mixer library. This suggests that the SDL_mixer version being used is too old to be built on the Raspberry Pi 5. The Raspberry Pi 5 has a more powerful processor and more memory than the Raspberry Pi 4, which means that it can handle more recent versions of libraries and tools.

Identifying the Problematic Versions

After digging around, it was discovered that the SDL version and SDL_mixer version being used were too old to be built on the Raspberry Pi 5. The exact versions were not specified, but it is likely that they were older than 2.0.14 and 2.0.4, respectively.

Updating the SDL and SDL_mixer Versions

To overcome the issue, it is necessary to update the SDL and SDL_mixer versions to more recent ones that can be built on the Raspberry Pi 5. This can be done by changing the version numbers in the CMakeLists.txt file or by using a more recent version of the SDL and SDL_mixer libraries.

Step-by-Step Guide to Updating the SDL and SDL_mixer Versions

Step 1: Update the SDL Version

To update the SDL version, you need to change the version number in the CMakeLists.txt file. You can do this by searching for the line that starts with set(SDL_VERSION) and changing the version number to a more recent one.

set(SDL_VERSION 2.0.14)

Step 2: Update the SDL_mixer Version

Similarly, to update the SDL_mixer version, you need to change the version number in the CMakeLists.txt file. You can do this by searching for the line that starts with set(SDL_MIXER_VERSION) and changing the version number to a more recent one.

set(SDL_MIXER_VERSION 2.0.4)

Step 3: Update the SDL and SDL_mixer Libraries

Alternatively, you can update the SDL and SDL_mixer libraries to more recent versions. This can be done by running the following commands:

sudo apt-get update
sudo apt-get install libsdl2-dev libsdl2-mixer-dev

Step 4: Rebuild the Project

After updating the SDL and SDL_mixer versions, you need to rebuild the project. This can be done by running the following command:

cmake .
make

Conclusion

In conclusion, the issue with building Bookworm on the Raspberry Pi 5 is due to the outdated and SDL_mixer versions. By updating the versions to more recent ones, you can overcome the issue and successfully build the project. This article provides a step-by-step guide on how to update the SDL and SDL_mixer versions and rebuild the project.

Troubleshooting Tips

  • Make sure that you have the latest version of the SDL and SDL_mixer libraries installed.
  • Check that the version numbers in the CMakeLists.txt file are correct.
  • If you are still experiencing issues, try rebuilding the project with a clean build directory.

Additional Resources

Related Articles

Frequently Asked Questions

Q: What is the issue with building Bookworm on Raspberry Pi 5?

A: The issue is due to the outdated SDL and SDL_mixer versions. These versions are too old to be built on the Raspberry Pi 5, which has a more powerful processor and more memory than the Raspberry Pi 4.

Q: How do I update the SDL and SDL_mixer versions?

A: You can update the versions by changing the version numbers in the CMakeLists.txt file or by using a more recent version of the SDL and SDL_mixer libraries.

Q: What are the minimum required versions of SDL and SDL_mixer?

A: The minimum required versions of SDL and SDL_mixer are 2.0.14 and 2.0.4, respectively.

Q: How do I update the SDL and SDL_mixer libraries?

A: You can update the SDL and SDL_mixer libraries by running the following commands:

sudo apt-get update
sudo apt-get install libsdl2-dev libsdl2-mixer-dev

Q: What if I am still experiencing issues after updating the SDL and SDL_mixer versions?

A: If you are still experiencing issues, try rebuilding the project with a clean build directory. You can do this by running the following command:

cmake .
make

Q: What are some common troubleshooting tips for building Bookworm on Raspberry Pi 5?

A: Some common troubleshooting tips include:

  • Make sure that you have the latest version of the SDL and SDL_mixer libraries installed.
  • Check that the version numbers in the CMakeLists.txt file are correct.
  • Try rebuilding the project with a clean build directory.

Q: Where can I find additional resources for building Bookworm on Raspberry Pi 5?

A: You can find additional resources on the following websites:

Q: Are there any related articles that I can read to learn more about building RetroPie on Raspberry Pi 5?

A: Yes, there are several related articles that you can read to learn more about building RetroPie on Raspberry Pi 5. Some of these articles include:

Conclusion

In conclusion, building Bookworm on Raspberry Pi 5 can be a challenging task, but with the right resources and troubleshooting tips, you can overcome the issues and successfully build the project. This Q&A article provides answers to some of the most frequently asked questions about building Bookworm on Raspberry Pi 5.