Graph Visualization Is Not Working Properly With An Adapted Config (Temperature Data Not Available)

May 18, 2025 by ADMIN 100 views

**Graph Visualization Issues with Adapted Config: Temperature Data Not Available**

Introduction

Graph visualization is a crucial aspect of data analysis, allowing users to quickly identify trends and patterns in their data. However, when adapting a config to a new set of sensors, issues with graph visualization can arise. In this article, we will explore the issue of temperature data not being available in the web interface after adapting the config.

The Problem

After adapting the config to a new set of sensors, the visualization in the web interface was not working properly. Data for temperature was not visible in our tests. Despite the data being measured correctly and stored in the database, the temperature data was not being displayed in the graph.

Example of Missing Temperature Data

The following image shows an example of the missing temperature data:

Used Config

The config used in this test is as follows:

device: Sailowtech CTD
sensors:
  dissolved-oxygen:
    name: "Dissolved Oxygen 1"
    address: 0x61
    sensor-type: "ATLAS_EZO_DO"
    min-delay: 1.05
  dissolved-oxygen-2:
    name: "Dissolved Oxygen 2"
    address: 0x62
    sensor-type: "ATLAS_EZO_DO"
    min-delay: 1.05
  conductivity:
    name: "Conductivity Probe"
    address: 0x64
    sensor-type: "ATLAS_EZO_CONDUCTIVITY"
    min-delay: 1.05
  temperature-do:
    name: "Temperature (DO Sensor)"
    address: 0x67
    sensor-type: "ATLAS_EZO_TEMP"
    min-delay: 1.05
  depth:
    name: "Depth Sensor"
    address: 0x76
    sensor-type: "BLUEROBOTICS_BAR30_DEPTH"
    min-delay: 1.05
mock: false

Possible Causes

There are several possible causes for the issue of temperature data not being available in the web interface. Some of these causes include:

Incorrect Sensor Configuration: The sensor configuration may be incorrect, leading to the temperature data not being displayed.
Data Storage Issues: There may be issues with the data storage, causing the temperature data to not be available.
Graph Visualization Issues: There may be issues with the graph visualization itself, preventing the temperature data from being displayed.

Troubleshooting Steps

To troubleshoot this issue, the following steps can be taken:

Check Sensor Configuration: Verify that the sensor configuration is correct and that the temperature sensor is properly configured.
Check Data Storage: Check the data storage for any issues that may be causing the temperature data to not be available.
Check Graph Visualization: Check the graph visualization for any issues that may be preventing the temperature data from being displayed.

Conclusion

In conclusion, the issue of temperature data not being available in the web interface after adapting the config is a complex problem that requires careful troubleshooting. By following the troubleshooting steps outlined above, it is possible to identify and resolve the issue, ensuring that the temperature data is properly displayed in the graph.

Recommendations

Based on the analysis of this issue, the following recommendations can be made:

Verify Sensor Configuration: Verify that the sensor configuration is correct and that the temperature sensor is properly configured.
Check Data Storage: Check the data storage for any issues that may be causing the temperature data to not be available.
Check Graph Visualization: Check the graph visualization for any issues that may be preventing the temperature data from being displayed.

Future Work

Future work on this issue may include:

Implementing Additional Troubleshooting Steps: Implementing additional troubleshooting steps to help identify and resolve the issue.
Improving Data Storage: Improving the data storage to prevent issues with temperature data not being available.
Enhancing Graph Visualization: Enhancing the graph visualization to prevent issues with temperature data not being displayed.

References

[1] [Link to relevant documentation or resources]

Acknowledgments

Introduction

In our previous article, we explored the issue of temperature data not being available in the web interface after adapting the config. In this article, we will provide a Q&A section to help answer some of the common questions related to this issue.

Q: What are the possible causes of temperature data not being available in the web interface?

A: There are several possible causes for the issue of temperature data not being available in the web interface. Some of these causes include:

Incorrect Sensor Configuration: The sensor configuration may be incorrect, leading to the temperature data not being displayed.
Data Storage Issues: There may be issues with the data storage, causing the temperature data to not be available.
Graph Visualization Issues: There may be issues with the graph visualization itself, preventing the temperature data from being displayed.

Q: How can I troubleshoot this issue?

A: To troubleshoot this issue, the following steps can be taken:

Check Sensor Configuration: Verify that the sensor configuration is correct and that the temperature sensor is properly configured.
Check Data Storage: Check the data storage for any issues that may be causing the temperature data to not be available.
Check Graph Visualization: Check the graph visualization for any issues that may be preventing the temperature data from being displayed.

Q: What are some common mistakes that can cause temperature data not to be available?

A: Some common mistakes that can cause temperature data not to be available include:

Incorrect Sensor Address: The sensor address may be incorrect, leading to the temperature data not being displayed.
Incorrect Sensor Type: The sensor type may be incorrect, leading to the temperature data not being displayed.
Incorrect Data Storage: The data storage may be incorrect, causing the temperature data to not be available.

Q: How can I improve the data storage to prevent issues with temperature data not being available?

A: To improve the data storage and prevent issues with temperature data not being available, the following steps can be taken:

Verify Data Storage Configuration: Verify that the data storage configuration is correct and that the temperature data is being stored properly.
Check Data Storage for Errors: Check the data storage for any errors that may be causing the temperature data to not be available.
Implement Data Backup: Implement data backup to prevent data loss in case of errors or issues with the data storage.

Q: How can I enhance the graph visualization to prevent issues with temperature data not being displayed?

A: To enhance the graph visualization and prevent issues with temperature data not being displayed, the following steps can be taken:

Verify Graph Visualization Configuration: Verify that the graph visualization configuration is correct and that the temperature data is being displayed properly.
Check Graph Visualization for Errors: Check the graph visualization for any errors that may be causing the temperature data not to be displayed.
Implement Graph Visualization Backup: Implement graph visualization backup to prevent data loss in case of errors or issues with the graph visualization.

Q: What are some best practices for troubleshooting temperature data not being available in the web interface?

A: Some best practices for troubleshooting temperature data not being available in the web interface include:

Verify Sensor Configuration: Verify that the sensor configuration is correct and that the temperature sensor is properly configured.
Check Data Storage: Check the data storage for any issues that may be causing the temperature data to not be available.
Check Graph Visualization: Check the graph visualization for any issues that may be preventing the temperature data from being displayed.

Conclusion

In conclusion, the issue of temperature data not being available in the web interface after adapting the config is a complex problem that requires careful troubleshooting. By following the troubleshooting steps and best practices outlined in this article, it is possible to identify and resolve the issue, ensuring that the temperature data is properly displayed in the graph.