PSP Street E100 All Buttons Freeze After Installing ARK Loader / Other CFWs

by ADMIN 76 views

Introduction

The PSP Street E100, a variant of the PlayStation Portable (PSP) handheld console, has been known to experience issues with button freezing after installing ARK Loader or other Custom Firmware (CFW) solutions. This problem can be frustrating for users who rely on these loaders for homebrew and game access. In this article, we will delve into the possible causes and solutions for this issue.

Symptoms

The symptoms of this problem are as follows:

  • After installing ARK Loader or other CFWs, the PSP Street E100's buttons stop responding, except for the volume button.
  • The volume button remains functional, allowing users to adjust the volume.
  • When the PSP is forced to restart, all buttons begin working normally.
  • This issue is not limited to ARK Loader, as it also occurs with Infinity CFW.

Possible Causes

There are several possible causes for this issue, including:

  • Incompatible CFWs: The CFWs installed on the PSP may be incompatible with the PSP Street E100's hardware, leading to button freezing.
  • Plugin Conflicts: Plugins installed on the PSP may be conflicting with each other or with the CFW, causing the buttons to freeze.
  • System Settings: Certain system settings, such as the CPU clock or memory stick speedup, may be causing the issue.

Steps to Reproduce

To reproduce this issue, follow these steps:

  1. Install ARK Loader or other CFWs: Install ARK Loader or other CFWs on the PSP Street E100.
  2. Reboot the PSP: Reboot the PSP after installing the CFW.
  3. Observe the buttons: Observe the buttons on the PSP and note that they stop responding, except for the volume button.

System Settings

The following system settings may be contributing to the issue:

  • USB Charge: Off
  • CPU Clock in Game: Auto
  • CPU Clock in XMB: Auto
  • WPA2: Off
  • Autoboot Launcher: Off
  • Disable PSP Go Pause: Off
  • Old Plugin Support on ef0: Off
  • Prevent hibernation deletion: Off
  • Use Extra Memory: Auto
  • Memory Stick Speedup: Off
  • Inferno Cache: Off
  • Skip Sony Logos: Off
  • Hide PIC0 and PIC1: Off
  • Hide MAC Address: Off
  • Hide DLC: Off
  • Turn off LEDs: Off
  • Disable UMD Drive: Off
  • Disable Analog Stick: Off
  • Enable QA Flags: Off

Custom Settings

If you have any custom settings, please provide them below:

No response

Verification of Form

I agree that I properly filled out the items listed above.

Troubleshooting Steps

To troubleshoot this issue, follow these steps:

  1. Reset the PSP: Reset the PSP to its default settings.
  2. Reinstall the CFW: Reinstall the CFW and observe if the issue persists.
  3. Disable plugins: Disable all plugins and observe if the issue persists.
  4. Check system settings: Check the system settings and adjust them as necessary.
  5. Contact the CFW developer: Contact the CFW developer for further assistance.

Conclusion

Introduction

The PSP Street E100's button freezing issue after installing ARK Loader or other CFWs has been a persistent problem for many users. In this Q&A article, we will address some of the most frequently asked questions related to this issue.

Q: What causes the PSP Street E100's buttons to freeze after installing ARK Loader or other CFWs?

A: The buttons on the PSP Street E100 may freeze after installing ARK Loader or other CFWs due to incompatible CFWs, plugin conflicts, or system settings.

Q: How can I troubleshoot the issue?

A: To troubleshoot the issue, follow these steps:

  1. Reset the PSP: Reset the PSP to its default settings.
  2. Reinstall the CFW: Reinstall the CFW and observe if the issue persists.
  3. Disable plugins: Disable all plugins and observe if the issue persists.
  4. Check system settings: Check the system settings and adjust them as necessary.
  5. Contact the CFW developer: Contact the CFW developer for further assistance.

Q: What system settings may be contributing to the issue?

A: The following system settings may be contributing to the issue:

  • USB Charge: Off
  • CPU Clock in Game: Auto
  • CPU Clock in XMB: Auto
  • WPA2: Off
  • Autoboot Launcher: Off
  • Disable PSP Go Pause: Off
  • Old Plugin Support on ef0: Off
  • Prevent hibernation deletion: Off
  • Use Extra Memory: Auto
  • Memory Stick Speedup: Off
  • Inferno Cache: Off
  • Skip Sony Logos: Off
  • Hide PIC0 and PIC1: Off
  • Hide MAC Address: Off
  • Hide DLC: Off
  • Turn off LEDs: Off
  • Disable UMD Drive: Off
  • Disable Analog Stick: Off
  • Enable QA Flags: Off

Q: Can I use custom settings to resolve the issue?

A: If you have any custom settings, you can try adjusting them to resolve the issue. However, be cautious when making changes to system settings, as they can potentially cause further issues.

Q: What if I've tried all the troubleshooting steps and the issue persists?

A: If you've tried all the troubleshooting steps and the issue persists, it may be necessary to contact the CFW developer for further assistance. They may be able to provide additional guidance or patches to resolve the issue.

Q: Can I prevent the issue from occurring in the future?

A: To prevent the issue from occurring in the future, make sure to:

  • Use compatible CFWs: Only use CFWs that are compatible with the PSP Street E100.
  • Disable plugins: Disable all plugins before installing CFWs.
  • Check system settings: Regularly check the system settings and adjust them as necessary.

The PSP Street E100's button freezing issue after installing ARK Loader or other CFWs can be a frustrating problem. By following the troubleshooting steps outlined in this Q&A article, users can attempt to resolve the issue. If the issue persists, it may be necessary to contact the CFW developer for further assistance.